Not all
options are available for all GEMTOP models.
Please refer
to specific model pages for availability and pricing.
Option
Number
|
Detailed
Option Description
|
|
1.
|
Paint -
A basecoat clearcoat automotive grade paint. |
|
2.
|
Solid Steel
Front - In place of front glass, has additional 16 gauge bracing. |
|
3.
|
Sliding
Front Window - Clamp
ring mount, single latch, center opening made with 1/8" clear tempered
safety glass, automotive grade. |
|
4.
|
Security
Screens - Constructed of expanded aluminum, won't rust, protects driver
from shifting cargo, burglar deterrent. |
|
5.
|
Lift-Up
Side Doors - 3/4"
Aluminum frame with 24 gauge galvanized steel skin. Top quality stainless
steel and powder coated Eberhard paddle handle with (2) two stage adjustable
rotary latches. Equipped with Strattec automotive grade key cylinders,
(2) gas assist struts. |
|
6.
|
Fixed
Side Window for Lift-Up Side Door - Made
from 1/8" tempered safety glass, equal to OEM windows. Better scratch resistance,
no road grime damage, no discoloration and better strength.
| (Approximate
sizes 6" x 56" - 12" x 56") |
|
|
7.
|
Sliding
Side Window for Lift-Up Side Door - Made from 1/8" tempered safety
glass, equal to OEM windows. Better scratch resistance, no road grime damage,
no discoloration and better strength.
| (Approximate
sizes 6" x 56" - 12" x 56") |
|
|
8.
|
Security
Screen for Fixed or Sliding Window in a Lift-Up Side Door - Expanded
aluminum.
| Fixed side
window - Full screen 12" x 56" |
| Sliding side
window - Half screen 12" x 28" |
|
|
10.
|
Sliding
Side Windows - Clamp
ring mount, curved dark tint glass with nylon screening when opened. OEM
quality.
| (Approximate
sizes 16" x 68" - 16" x 86") |
|
|
11.
|
Security
Screen - For aluminum curved side sliding window.
|
|
12.
|
Rear Window
for Lift-Up Rear Door - Clamp ring mount, dark tint tempered safety
glass.
| (Approximate
sizes 20" x 68" - 22" x 58") |
|
|
13.
|
Security
Screen - Expanded aluminum for Lift-Up rear door.
| (Approximate
sizes 20" x 68" - 22" x 58") |
|
|
14.
|
Single
Walk-In Rear Door -
3/4" Aluminum frame with 24 gauge galvanized steel skin, equipped with
top quality stainless steel and powder coated Eberhard paddle handle with
(2) two stage adjustable rotary latches. Equipped with Strattec automotive
key cylinders.
| (Approximate
opening - 32" Wide x up to 39" High) |
|
|
15.
|
Double
Walk-In Rear Doors - 3/4"
Aluminum frame with 24 gauge galvanized steel skin, equipped with top quality
stainless steel and powder coated Eberhard paddle handle with (2) two stage
adjustable rotary latches. Equipped with Strattec automotive key cylinders,
opposite door with standard slam latches.
| (Approximate
opening - 46" W x 36.6" H - 49" W x 38.6" H) |
|
|
16.
|
Window
(Fixed) for Walk-In Rear Doors - Clamp ring mount, 1/8" tempered dark
tint glass. Automotive grade.
| Single Walk-In
Rear Door - 20" x 27" |
|
|
17.
|
Window
(Fixed) for Walk-In Rear Doors - Clamp ring mount, 1/8" tempered dark
tint glass. Automotive grade.
| Double Walk-In
Rear Door - 18" x 18" Each Door |
|
|
18.
|
Security
Screen for Walk-In Rear Door Windows -
Constructed of expanded aluminum.
| Single Door
- 20" x 27" |
| Double Door
- 18" x 18" Each Door |
|
|
19.
|
Load Shift
Panels for Walk-In Rear Doors - Made from 24 gauge steel. These panels
are mounted to the lower inside half of each door to protect the outer
door skin from cargo shifting damage. |
|
20.
|
Dome Lights
-
A 12 volt light is located above the rear door. Additional lights
can be ordered for over each side Lift-Up door. |
|
21.
|
Courtesy
Light Switches - Facilitates the installation of truck alarms. automatically
activates the dome light when the side or rear door is opened. Order one
for each door opening required. |
|
22.
|
Ladder
Racks - A heavy duty aluminum rack designed for your ladders or platforms.
Bolts directly through the sides and through the substructure framing for
a stable support. One crossmember front, one rear. |
|
23.
|
Ladder
Rack with Rollers - A heavy duty aluminum rack designed with a metal
sleeve covering the back cross member that will ease the loading from the
rear. |
|
24.
|
Ladder
Rack - Wards - A
heavy duty aluminum rack with four cross members connected with a side
angle and mounted from the side in six locations. |
|
25.
|
Heavy Duty
4 x 4 Package - Included in this option are the addition of welded-in
extra angle iron and strategically placed steel gussets to help support
any off-road use in flexing and racking of the truck bed. Highly suggested
for Fullsize longbed 4WD vehicles. |
|
26.
|
Reinforced
Roof Plates - 6" x 9" 10 gauge steel plates are welded inside the roof
along with the addition of extra roof bows to provide a suitable foundation
for transporting heavier loads safely. It is necessary to order the
reinforced roof plates to accommodate the Adrian or Masterack rack system.
Available on Workmaster only. |
|
27.
|
Tool
Box -
Requires side door access. Made from the same 24 gauge galvanized steel
as the top. The Workmaster toolbox offers (2) shelves. The Gemsport and
Outfitter versions provides a one height shelf. This option can be mounted
at the factory or installed separately. L/H & R/H are the same part.
Drilling required for installation. |
|
28.
|
Reinforced
Sides for Boat Loader - A Steel reinforcement is welded along side
the existing inside corner frame to accommodate the mounting of a boatloader. |
|
29.
|
Roll-Out
Cargo Drawer -
Helps reach tools and move heavy equipment without straining. Uses all
space between the wheel wells inside the bed. Made from heavy duty steel
and stainless steel ball bearings that carry loads up to 1,200 pounds. |
|
30.
|
Adrian
Grip-Lock Racks - Protect the sides and roof of the cap during loading
and unloading of ladders. All top grip-lock racks feature a lockable, gripping
mechanism which firmly secures two ladders to the top of your cap. Actuating
arm prevents shifting by gripping tight to your ladder's rungs. Racks easily
adjust for ladders of different sizes. Galvanized plated steel is used
throughout for lasting quality within arm's reach. |
|
31.
|
Passview
Side Window -
Side access lift-up framed window with locking handles and gas assist props.
| (Approximate
sizes - 16" x 68" - 16" x 86") |
|
|
32.
|
Headliner
- A 100% high UV solution-dyed fiber material. Durable, easy maintenance,
resists mold and mildew, perfect for custom appearance. All hand laid. |
|
33.
|
GT
Classic Tonneau Cover Clamp-on Installation Hardware -
Specially designed clamps are furnished to clamp on tonneau for those who
wish to drill only two holes in the tailgate. (Permanent mount uses a total
of 14 screws) Not available for all models. |
|
34.
|
GT
Classic Tonneau - Dual Locks -
For a custom look for those who wish to have the security of a dual locking
system. Includes additional lift-up handle. |
|
35.
|
GT
Classic Tonneau- Weatherproof Lock Cover -
Polished metal lock cover to keep the inclimate weather off the key cylinder. |
|
36.
|
GT Classic
Tonneau- Custom Length - Special cut lengths to fit behind cab extenders
and tool boxes. (Current model applications only) |
|
37.
|
GT Classic
Tonneau- Other Custom Applications - Special cut sizes not carried
in normal stock sizes. (Cut to specific dimensions) |
|
42.
|
Commercial
Tonneau Cover - Ladder Rack - Bed length 6' - 8', a heavy duty
metal and aluminum combination rack designed to fit with the tonneau. Attaches
to mounting frame of tonneau cover without drilling the truck bed. Built
to the length of the bed. |
|
43.
|
Commercial
Tonneau Cover - Ladder Rack - Over the cab length
8' - 10', mounts directly to the tonneau mounting frame and extends over
the cab approximately 2 feet. |
|
44.
|
Commercial
Tonneau Cover - Conduit and Pipe Carrier - A 1/8"
thick wall by 4" internal diameter PVC tube that will accept lengths up
to 10 feet. screw on cap at one end. Will mount on either ladder rack.
Includes all mounting hardware. |
|
45.
|
Commercial
Tonneau Cover - Drop-In Storage Bins - Constructed
with durable high-density polyethylene. Can be divided into compartments
with interlocking dividers.
| 22' x 17"
x 3" Deep (Internal Depth) |
|
|
46.
|
Commercial
Tonneau Cover - Drop-In Storage Bins -
Constructed with durable high-density polyethylene. Can be divided into
compartments with interlocking dividers.
| 22' x 17"
x 6" Deep (Internal Depth) |
|
|
47.
|
Commercial
Tonneau Cover - Drop-In Storage Bins -
Constructed with durable high-density polyethylene. Can be divided into
compartments with interlocking dividers.
| 22' x 17"
x 8" Deep (Internal Depth) |
|
|
48.
|
Commercial
Tonneau Cover - Drop-In Bin Dividers -
Separates your parts or tools in one inch increments.
|
|
49.
|
Commercial
Tonneau Cover - Drop-In Bin Dividers -
Separates your parts or tools in one inch increments.
|
|
50.
|
Commercial
Tonneau Cover - Frame Assembly - For drop-in storage bins, made from
heavy duty powder coated steel. Attaches to "T" mounting frame. Enough
framing is supplied to allow bins to be installed on both sides of Tonneau
if required. |
|
52.
|
Battery Powered Dome Light -
A 2" x 5" light attaches to inside of tonneau covers. Operates with two
"C" size batteries. |
|
53.
|
Commercial
Tonneau Cover - Drop-In Storage Bin Cover - A durable high-density
polyethylene cover, custom fit to the bin size to protect valuable parts
and supplies. |
